Summary
- Blackburn with Darwen Borough Council has awarded Sudlows a £124,325.88 contract covering data centre maintenance and new energy monitoring.
- The agreement runs from 1 November 2026 to 31 October 2027 and follows an earlier maintenance arrangement with the contractor.
- The council has not disclosed the monitoring equipment, measured facility consumption or expected reductions in operating costs.
Sudlows has secured a £124,326 contract with Blackburn with Darwen Borough Council covering data centre maintenance and the provision of a new energy monitoring solution.
The award, published in the council’s procurement register on 19 November, runs from 1 November 2026 to 31 October 2027. It was made through a YPO framework arrangement and extends an established relationship between the council and the Manchester-based critical infrastructure contractor.
The contract’s stated scope combines maintenance with new energy monitoring. The publicly available information does not identify the monitoring platform, the number or location of measurement points, or any specified electricity savings.
Sudlows also held a data centre maintenance contract for the council during the preceding year. That earlier agreement was valued at approximately £57,818 and ended on 31 October 2026.
The difference between the two contract values should not be interpreted directly as an increase in maintenance expenditure. The newly published award includes energy monitoring, while the records do not provide an itemised comparison of the work covered by the separate agreements.
Sudlows has previously worked on the council’s data centre infrastructure. Its published project history describes the development of a facility incorporating flywheel-based UPS technology, free cooling and separate disaster recovery arrangements.
Monitoring can identify changes in operating demand
Electricity consumption in a data centre includes the power used by computing equipment and the supporting systems required to operate it. Servers, storage arrays and network devices account for the IT load, while cooling equipment, electrical losses and other building systems contribute additional demand.
Energy monitoring can provide information about how these loads change over time. Metering at appropriate points can help distinguish electricity used by computing equipment from consumption associated with cooling and other supporting infrastructure.
That distinction is necessary when assessing operating efficiency. An increase in total electricity consumption may result from additional computing work, higher cooling demand or a change in equipment behaviour.
Without suitable measurements, an operator may be unable to determine which part of the installation is responsible for the change.
Power usage effectiveness compares the total electricity consumed by a data centre with the electricity used by its IT equipment. A valid calculation requires consistent measurement boundaries and reliable data for both quantities.
Installing monitoring equipment does not automatically produce a lower PUE. It can provide information to support operational decisions, but any improvement depends on the actions taken and their measured effects.
Cooling infrastructure offers several possible areas for investigation. Fan operation, pump loading, cooling setpoints and the performance of heat exchange equipment can affect electricity use, although these relationships depend on the system design.
For example, a cooling system may consume additional electricity because it is serving a higher computing load. A similar increase could also result from equipment degradation or changes to control settings.
Maintenance personnel need sufficient operating context to distinguish these causes. Electricity measurements alone may be insufficient without corresponding information about temperatures, equipment status and IT utilisation.
The council’s award record does not establish whether the new solution includes that additional information or whether it will connect with an existing building management system or data centre infrastructure management platform.
Maintenance remains a separate operational requirement
Monitoring can indicate that equipment is operating outside expected conditions, but physical inspection, testing and maintenance remain necessary to establish the cause and correct faults.
Electrical equipment requires attention to connections, protection arrangements and component condition. UPS installations must retain the ability to support designated loads when the normal electricity supply is interrupted.
Sudlows’ earlier Blackburn project incorporated a flywheel UPS arrangement. Flywheel systems store kinetic energy in a rotating mass and can release it through associated electrical equipment to support a load during a supply interruption.
The operating characteristics differ from those of battery-backed systems. Performance depends on the installed equipment, controls and the relationship with other sources of backup electricity.
The earlier council project also used free cooling technology intended to take advantage of suitable outdoor conditions. Such systems can reduce reliance on mechanical refrigeration when ambient conditions permit, although the actual energy benefit depends on operating temperatures and the cooling configuration.
Those historical design features provide context for Sudlows’ experience at Blackburn. The latest maintenance contract does not state that the original equipment remains unchanged or identify which components are included in the current service schedule.
Maintenance work must also be coordinated with the council’s computing operations. An electrical isolation or cooling equipment intervention may require a planned maintenance window or alternative infrastructure capable of sustaining the affected load.
Preventive maintenance can reduce the likelihood of certain failures, but it cannot eliminate every interruption. Resilience depends on the condition and configuration of the equipment and the procedures used when faults occur.
The combination of maintenance and energy monitoring may allow operational staff to investigate equipment condition alongside changes in electricity demand. Its effectiveness will depend on the selected monitoring equipment, the available measurements and the maintenance decisions supported by that information.
The council has not disclosed implementation dates for the new monitoring system or committed to quantified energy reductions. Those outcomes will need to be established through installation, commissioning and subsequent operating data.

