Summary
- TransferPacT UC replaces Schneider Electric's established UA and BA controllers and integrates with ComPacT NSX and MasterPacT MTZ circuit breakers.
- The equipment monitors supply interruptions, source imbalance and neutral faults, with five expansion slots supporting seven module types.
- The controller is available through distributors, but no completed data centre installation or independently measured availability improvement has been disclosed.
Schneider Electric has introduced a modular controller for automatic electrical supply transfer, combining fault monitoring, switching controls and remote management functions for critical infrastructure installations, including data centres.
The TransferPacT Universal Controller was launched in the UK on 17 November as a replacement for Schneider Electric’s established UA and BA controller products.
It is designed for automatic transfer switch equipment, which manages the movement of an electrical load between available power sources when specified operating conditions are detected.
The controller continuously monitors the primary source for conditions including supply loss, source imbalance and neutral faults. When the configured conditions require a transfer, it can command compatible switching equipment to change to an alternative supply.
Schneider Electric has developed the product around its ComPacT NSX and MasterPacT MTZ circuit breaker families, combining the controller and associated equipment within a pre-wired, validated configuration.
The integrated arrangement is intended to reduce the amount of separate wiring and assembly required by panel builders and electrical contractors during installation.
The company also identifies modular expansion and remote monitoring as features intended to simplify upgrades and ongoing management.
These capabilities address the control and switching layer of electrical infrastructure. They do not independently provide additional generation, battery storage or redundant electricity connections.
Automatic transfer depends on complete electrical design
Data centre electrical installations commonly incorporate arrangements intended to maintain supply to critical computing systems when individual components or power sources become unavailable.
Depending on the facility, these may involve multiple utility supplies, backup generators, uninterruptible power systems and different distribution paths serving the connected equipment.
Automatic transfer equipment performs a defined function within those arrangements. It monitors relevant electrical conditions and commands switching between sources according to the control logic and protection requirements established for the installation.
The availability of an alternative supply is essential. A controller cannot transfer a load successfully if the receiving source is unavailable, unsuitable or incapable of supporting the connected electrical demand.
Generator-backed systems may also require a starting sequence before the alternative source can accept load. The total time needed to restore supply depends on the equipment and system configuration.
Critical computing installations frequently use uninterruptible power systems to maintain selected loads during short interruptions or transitions. Their effectiveness depends on the installed design, energy storage, equipment condition and available autonomy.
Consequently, a claim that a transfer controller supports power continuity should not be interpreted as a guarantee of interruption-free operation across every connected facility.
Electrical protection and interlocking must prevent unsafe operating conditions, including inappropriate connections between sources.
Testing must establish that the equipment responds correctly to the defined fault conditions and that its operation is coordinated with upstream and downstream protection.
The TransferPacT Universal Controller has been developed to comply with IEC 60947-6-1, the standard governing low-voltage transfer switching equipment.
Compliance with that equipment standard is separate from demonstrating that an entire data centre electrical installation meets its specified resilience requirements.
Modular expansion changes maintenance arrangements
The new controller includes five expansion module slots supporting seven types of optional modules.
Schneider Electric describes these modules as hot-swappable, allowing certain functions to be added or changed without the planned shutdown of the controller arrangement.
The practical scope of such maintenance depends on the module, equipment configuration and the safety procedures governing work on the installation.
Hot-swappable control modules should not be confused with a general ability to replace energised circuit breakers or undertake unrestricted electrical maintenance without isolation.
The controller also integrates with Schneider Electric’s EcoStruxure ecosystem and Power Monitoring Expert software, providing access to switching events and selected remote monitoring and control functions.
Recording transfer events can help maintenance teams examine the behaviour of electrical infrastructure when abnormal supply conditions occur.
Event information may assist fault investigation by establishing the sequence of detected conditions and switching actions, provided suitable monitoring and time synchronisation arrangements are in place.
Remote control introduces additional operational requirements. Access permissions, management procedures and appropriate cybersecurity controls must be considered where switching functions can be initiated through connected systems.
Facilities replacing earlier UA or BA controllers must also assess compatibility with existing circuit breakers, wiring and control arrangements.
A new controller does not establish that every existing installation can be upgraded without modifications or an interruption to service.
Commissioning remains necessary to confirm that the replacement equipment behaves correctly under the operating conditions specified for the facility.
Schneider Electric says the pre-wired arrangement can reduce installation and commissioning work, while the modular design is intended to simplify subsequent changes.
However, the company has not disclosed an independently measured reduction in installation time, maintenance costs or data centre downtime associated with a completed customer deployment.
The TransferPacT Universal Controller is available through Schneider Electric’s distributor network.
Its contribution to electrical resilience will depend on how the controller is specified, installed, tested and maintained within the wider power infrastructure serving each facility.

